Standard Features
  • Car Safety
  • Slack Cable Device
  • Top Final Limit Switch
  • UL Certified Controller
  • Call-Send Stations
  • 200 lb, 300 lb, or 500 lb Capacity
  • Heavy Duty Welded Steel Car
Options
  • Car Gates
  • Car Lips
  • Hoistway Doors
  • Car Shelves
  • Car Light
  • “Car Here” Indicator
  • “In Use” Indicator
  • Door Open Buzzer
  • Lantern and Gong
  • Stainless Steel
  • Access Door
Drawings

Specifications
Waupaca Paca-Waiter by:
Mobility Elevator, 4 York Avenue, West Caldwell, NJ – PH: (800) 441-4181 or (973) 618-9545 – FAX: (973) 618-9638

CAPACITY 200lb, 300lb or 500lb
TRAVEL up to 50 ft.
STOPS up to 6 stops
SPEED 50 feet per minute
OVERHEAD 1′-6″ min., 2′ recommended above top of car (additional overhead required for car gates or overhead machine configurations).
LOADING HEIGHT 36″ min. when machine is “rail-mounted” below car (overhead or remote machine location and/or pit, required for loading heights below 36″).
GUIDE RAILS heavy gauge steel channel
ELECTRIC SUPPLY 230 volts, single phase standard. 208/230/460 volts, three phase, available. for 208 volts, single phase, a Buck Boost transformer must be added.
POWERHEAD single speed winding drum with 1 HP or 2 HP motor.
BRAKE electromagnetic drum brake, electrically released and spring applied.
CONTROLS momentary contact call/send push buttons at each landing.
SAFETIES twin instantaneous broken cable, applied by a retained compression spring
CABLE 3/16″ or 5/32″ diameter aircraft cable.
HOISTWAY DOOR INTERLOCKS required at each landing.
EMERGENCY LOWERING manual hand crank