Architect Guide

Cable-Waiter - Technical Information

Mini-waiter and Cable-waiter Hoistway Drawing

Capacity: 50lb or 100lb
Travel: Up to 50 ft.
Stops: Up to 6 stops.
Speed: 30 feet per minute.
Overhead: 8″ min., 1′-6″ recommended above top of car (additional overhead required for car gates or overhead machine configurations).
Loading Height: 30″ min. when machine is “rail-mounted” below car (overhead or remote machine location and/or pit, required for loading heights below 30″).
Guide Rails: Heavy gauge steel angles.
Electricity Supply: 115 volts, single phase standard. 230 volts, single phase, available.
Powerhead: Single speed winding drum with 3/4 HP motor.
Brake: Electromagnetic drum brake, electrically released and spring applied.
Controls: Momentary contact call/send push buttons at each landing.
Safeties: Twin instantaneous broken cable, applied by a retained compression spring
Cable: 1/8″ diameter steel cable.
Hoistway Door Interlocks: Required at each landing.
Emergency Lowering: Manual hand crank.

Any questions? Contact one of our experts.

(800) 441-4181