West Caldwell, New Jersey
800-441-4181
973-618-9545

Stairlifts – Bruno Electra-Ride III – Information

Standard Features
  • Aluminum extrusion rail
  • 45º and 90º swivel seat at top and bottom landings
  • Adjustable seat height
  • Adjustable footrest height
  • Swivel seat handle (reversible side)
  • 120 VAC operating system with traveling cable
  • Seat belt with positive locking mechanism
  • Flip-up padded armrests
  • Constant pressure control switch on armrest (reversible side)
  • Wall mounted call/send controls
  • Obstruction sensors
  • Unit is completely reversible on site for quick installation
  • Safety brake on carriage
  • ABS plastic carriage cover
Additional Applications
Inside Turn Applications
The Electra-Ride III now has additional applications not available on most other units on the market today. Our new inside turns give you the flexibility of having your unit mounted on either side of the staircase. These applications allow installation when there is a doorway or other obstruction along the outside of the landing that would make a conventional stairway lift impractical to put in. Perfect for bi-level houses where a mid-level landing needs to be accessible without blocking a door or room entrance. Our tight radius and narrow rail lets you keep the majority of your staircase without obstructions.

Wrap-around Park Positions
Enjoy more clearance room on your staircase when the unit is not in use by parking the chair around a corner. Our optional 90º and 180º park positions allow for a cleaner, neater appearance in your home and can move you away from the staircase for entering and exiting the unit. In addition, a park position will reduce the amount of space normally required on the bottom of the staircase.

Drawings

Possible Stairway Configurations:

(These drawings should be used for reference purposes only)
Specifications
Bruno Electra Ride III by:

Mobility Elevator,
4 York Avenue,
West Caldwell, NJ
PH: (800) 441-4181 or (973) 618-9545
FAX: (973) 618-9638

MODEL:
CRE-2110 STRAIGHT
CRE-2120 TOP OR BOTTOM OVERRUN
CRE-2130 INTERMEDIATE LANDING
CRE-2140 90 DEGREE TURN
CRE-2150 180 DEGREE TURN
CRE-2160 DOUBLE 90 DEGREE TURN
CRE-2170 LARGE RADIUS SPIRAL

RATED LOAD:
350 LBS. ONE PASSENGER

POWER SOURCE:
24 VOLT DC COMPRISED OF (2) 7 AMP/HR 12 VOLT

SEALED BATTERIES.
110 VOLT AC 1.5 AMP, 24 VOLT DC 3 AMP CONTINUOUS MONITORING CHARGER.

DRIVE:
24 VOLT DC MOTOR, 4 POLE RATED 1.32 HP
NO LOAD SPEED OF 3800 RPM.
20:1 RIGHT ANGLE SELF LOCKING WORM DRIVE
GEAR BOX WITH 3.75:1 INTERMEDIATE REDUCTION USING DUAL 9 MM BELTS.

FINAL DRIVE:
RACK & PINION – 8DP RACK WELDED TO THE RAIL WITH A SPUR GEAR ON THE GEARBOX SHAFT.

BRAKING:
DYNAMIC MOTOR BRAKING THROUGH THE MOTOR CONTROLLER AND SELF LOCKING WORM GEAR.

CONTROLS:
CONTINUOUS PRESSURE ROCKER SWITCH LOCATED ON ARMREST AND WALL MOUNTED CALL/SEND CONTROLS LOCATED AT BOTH TOP & BOTTOM LANDINGS.

ANGLES:
0 TO 45 DEGREES

SPEED:
35 FEET PER MINUTE UNLOADED
28 FEET PER MINUTE WITH RATED LOAD(SPEED SETTINGS ARE ADJUSTABLE)

Mobility Elevator and Lift Co. covers both New Jersey and New York regions.
Mobility
Elevator & Lift Co.
4 York Avenue
West Caldwell, NJ 07006
USA

Phone: (973) 618-9545
Toll Free: 1-800-441-4181
Fax: (973) 618-9638