| Platform dimensions |
Type I: 27.50" x 36" (700 x 914 mm)
Type II: 28.50" x 44" (724 x 1,118 mm
Type III: 30" x 48" (762 x 1,219 mm)
Type IV: 30" x 44" (762 x 1,118 mm)
All platforms have non-skid surfaces. The platform can be folded manually or with
the help of an optional power-fold platform. Once folded the unit uses very little space in order to leave the staircase unobstructed.
|
| Access ramps |
Two positive action automatic access ramps for straight or 90° entry.
|
| Motor assembly |
110 VAC, 1/2 hp (373 W), 1,750 rpm / Gear reducer: 50:1
|
| Type of drive unit |
Standard system: Aircraft cable 3/16" (5 mm) with breaking load of 4,200 Ibs (1,905 kg), deviator pulley and winding drum in a machine room. Plus system: Roller chain #50 and aircraft cable with a breaking load of 6,100 lbs (2,767 kg). The electric motor gear reducer and controller are self enclosed at the top landing in a drive cabinet. No machine room required.
|
| Controller |
Meets CSA and ETL standards - 24 VAC operating controls
|
| Power supply |
110 VAC, 1 Ph, 6o Hz, 15 amp
|
| Rated speed |
14.0 ft/min. (0.071 m/s) (approx.)
|
| Capacity |
One person in a wheelchair
|
| Rated load |
450 Ibs (204 kg)
|
| Operating |
Continuous pressure directional buttons are installed on the platform with a controls* key switch for increased safety.(*)
|
| Call stations |
Continuous pressure directional buttons are installed at each landing.
|
| Finish |
One coat of primer and two coats of beige acrylic urethane paint on all steel surfaces.
|
| Safety features |
Automatic dual access ramps, mechanical emergency brake
|
* Subject to change according to local regulations in effect.
