| CAPACITY |
200lb, 300lb or 500lb
|
| TRAVEL |
up to 50 ft.
|
| STOPS |
up to 6 stops
|
| SPEED |
50 feet per minute
|
| OVERHEAD |
1'-6" min., 2' recommended above top of car (additional overhead required for car gates or overhead machine configurations).
|
| LOADING HEIGHT |
36" min. when machine is "rail-mounted" below car (overhead or remote machine location and/or pit, required for loading heights below 36").
|
| GUIDE RAILS |
heavy gauge steel channel
|
| ELECTRIC SUPPLY |
230 volts, single phase standard. 208/230/460 volts, three phase, available. for 208 volts, single phase, a Buck Boost transformer must be added.
|
| POWERHEAD |
single speed winding drum with 1 HP or 2 HP motor.
|
| BRAKE |
electromagnetic drum brake, electrically released and spring applied.
|
| CONTROLS |
momentary contact call/send push buttons at each landing.
|
| SAFETIES |
twin instantaneous broken cable, applied by a retained compression spring
|
| CABLE |
3/16" or 5/32" diameter aircraft cable.
|
| HOISTWAY DOOR INTERLOCKS |
required at each landing.
|
| EMERGENCY LOWERING |
manual hand crank
|
